650 VA 12 V


Product Description
  • Operate on both Solar Power as well as Grid Power.
  • It is integrated with in-built fully regulated MPPT Solar Charge Controller for max. Solar Power utilization.
  • It senses the availability of solar power, grid power and accordingly gives preference to charging thru solar power and switches to the grid power if the solar power is not available.
  • It is designed to give you maximum benefit from the solar energy and minimize your electricity bill drastically.
  • Highly efficient battery charging from the solar energy as a result you will get non-stop power, save money, save electricity and protect the environment.
  • Advanced DSP based technology for absolute and stable and 100% pure sine wave output.
  • Indications for Mains ON, UPS ON, Batt. Low, Charging/ Discharging, Over Load, Short Circuit, Thermal Trip, Solar available/ Not available and PV reverse on LCD Display.
  • User- friendly LCD for the display of mode of operation and all parameters.
  • Dual Mode of working : UPS and Normal
  • UPS Mode : Fast switching, Input operating range from 180V to 260V.
  • Normal Mode : Wide Input operating range from 100V.
  • Closed Loop Auto Sensing Software Control (ASSC) Smart Battery Charging Technology for longer battery life, while charging either by Solar power or grid power.
  • Dual selectable charging current option for Normal Charging and High Charging.
  • Intelligent overload sensing circuitry with auto retries facility.
  • Programmable thermal protection : cooling fan which operates as needed.
  • High Power new generation MOSFET cable to handle high in-rush/ surge current.
  • Double stage MOSFET Over Current Protection by measuring Rds ON.
  • Highest efficiency at lower cost.
  • Pure Sine Wave Output with low Total Harmonic Distortion (TDH).
  • High End DSP based design of Solar Charge Controller for charging thru Solar Power.
  • Pulse by pulse current limiting with auto-reset resulting in efficient overload and short circuit protection.
  • Eco-friendly operation.
  • Solar PV reverse voltage Protection.
  • Electronic Over Current Charging Protection.
  • Reverse Current Flow Protection from Battery to Solar Panel generally during night.
  • No mechanical contact for charge controller.
  • Designed for continuous reliable and robust operation.
Technical Specification
Model 650 VA H-UPS
Nominal Battery Voltage 12 VDC
Solar Panel Connected for 40A MPPT Charge Controller (Max.) 600Wp
AC Mains Mode
Input Voltage Range (Normal Mode) 100 to 280 VAC + 5 VAC (Wide Range)
Input Voltage Range (UPS Mode) 180 to 260 VAC + VAC
Changeover Time Maximum < 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)
Max. Charging Current (NC) 10A + 1A
Max. Charging Current (HC) 10A + 1A
Boost Charging Voltage 14.4 + 0.2 VDC 28.8 + 0.4 VDC
Float Charging Voltage 13.7 + 0.2 VDC 27.4 + 0.4 VDC
Battery Backup Mode
Output Voltage at No Load 220 VAC + 7 VAC
Output Frequency 50.0Hz + 0.5Hz
Output Wave Form (At No Load) 100% Pure Sine Wave
Battery Low alarm 10.6 + 0.2 VDC 21.2 + 0.2 VDC
Battery Low protection 10.4 + 0.2 VDC 20.8 + 0.2 VDC
Overload (Normal/ UPS) 120%
Short Circuit (Normal/ UPS) 300%
Charging Mode - SOLAR (MPPT Charge Controller 40 Amp.)
Max. Charging Current (NC) 29 Amp. + 1.5Amp.
Max. Charging Current (HC) 32 Amp. + 1.5Amp.
Charge Controller Efficiency > 98%
Multi Color LCD Display Colors
  • Yellow Color : For Inverter/ UPS mode. No AC Mains (Utility Power)
  • Green Color : When AC mains (Utility Power) is available
  • Red Color : In case of any Abnormal Condition

Displaying Parameters
  • AC mains voltage
  • O/P Load in %
  • Battery input voltage
  • Battery Charging/ Discharging current (Bar Graph)
  • Faults Status
    • Overload
    • PV Reverse
    • Short Circuit
    • Fuse Trip
    • Over Temp (Thermometer)
    • Low Battery (Empty Battery Blinking)
  • Inverter Status
  • Solar availability Status

Protection

PV Reverse, Reverse Current Flow (to PV module), Battery Voltage Low (4 Auto Retries), Over Load (6 Auto Retries), Battery full Charge, Over Temperature, Short Circuit

Weight and Dimensions
Model 650 VA
With Packaging L x W x H (in mm) 345 x 328 x 185
Without Packaging L x W x H (in mm) 275 x 250 x 110
Net Weight 8.6Kg
Gross Weight 9.5Kg


Related Products